Abstract Details

files Add files

Progress at General Fusion

Author: Michel G Laberge
Requested Type: Consider for Invited
Submitted: 2011-06-07 16:06:57

Co-authors: General Fusion Team

Contact Info:
General Fusion Inc.
108-3680 Bonneville Place
Burnaby, B.-C.   12345
Canada

Abstract Text:
General fusion aims to develop an acoustically driven magnetized target fusion (MTF) reactor. Two spheromaks are made to merge in the center of a 3 m diameter sphere full of liquid lead-lithium. 200 pneumatic pistons hit the outside of the sphere and launch an inward going spherical pressure wave that focuses and compresses the merged spheromak (or FRC) to thermonuclear condition.

We have so far built one of the two spheromak generators and achieved 40 cm outside diameter, 2E16 cm-3, 20 eV and 80 us life. Our target is 40 cm OD, 1E17 cm-3, 100 eV and 100 us life. We have built two pneumatic pistons. The impact timing accuracy achieved by servo control is +/-5 us. Simulation indicates that we need +/- 10 us. We have successfully sent the pressure wave in liquid lead. Finally, in order to prove MTF faster without building the large and expensive sphere, we started a program with high explosive compression. Metal jetting into the collapsing chamber was observed. This might disrupt the plasma. We are changing the design of the compression chamber to address this issue.
In the next year, we are planning to collapse liquid metal cavity with 14 pistons to check the symmetry achieved. We also plan to compress in 100 us with high explosive the spheromak plasma from our generator from an initial 40 cm, 1E17 cm-3, 100 eV, 100 us life to a final 4 cm, 1E20 cm-3, 10 keV, 10 us life and therefore demonstrate break-even conditions. We presently have 24 M$ in the bank and 47 employees (and still hiring) to achieve these goals.

Characterization: C

Comments:

University of Washington

Workshop on Innovation in Fusion Science (ICC2011) and
US-Japan Workshop on Compact Torus Plasma
August 16-19, 2011
Seattle, Washington

ICC 2011